新增網頁1
 

ENGLISH  /  中文   

 

    Home   |   Introduction   |   Products   |   Videos   |   Installation   |   Downloads   |   Media Report   |   FAQ   |   Warranty   |   Contact Us

     
 

Installation

 
     
 
  Installation Information For:
T2Red » online | » downloadable (PDF) 
T2Reflecta » online | » downloadable (PDF) 
T2QuickNet » online | » downloadable (PDF) 
T2Blue » online | » downloadable (PDF) 
Isolecta » online | » downloadable (PDF) 

Building Materials Selector

There is more to a warm, renovated floor than only the floor heating system. Besides a quality floor heating system, a well-functioning warm floor also requires careful floor preparation and finishing. This is particularly important for renovation applications – because the sub floor can be anything.
 

 
       

 
       
       

Raychem systems have undergone severe compatibility testing at the leading building material suppliers in Europe. The result is a complete overview of which products can be used in combination with the selected Raychem floor heating system. By using these combinations and following the manufacturers recommendations for installation, you build a safe and long-lasting, warm floor. In general the following steps are required for tile floors:
  1. Apply a primer
  2. (optional) Level out any unevenness using self-leveling material
  3. Install the Raychem floor heating system
  4. (optional) Level out any unevenness using self-leveling material
  5. (optional) Apply a water barrier
  6. Apply a tile adhesive
  7. Lay tiles
  8. Apply grout between tiles
  9. Apply rubberized grout between wall and floor 

Compatible Products

 

T2Red

T2Red + T2Reflecta

T2QuickNet T2QuickNet + Isolecta
S-system FIX-system
 
 
 

 

 
 
Home | About Us | Products | Sup
 

  
                       
 

 
 

                    © 2019 RaychemFloorHeating.hk

Terms of Use